Product Details:
Payment & Shipping Terms:
|
Material: | Stainless Steel | Size: | L1000*W300*H1000MM |
---|---|---|---|
Interface: | TCP/IP | Tester Display: | LCD |
Application: | ESD Inspection And Access Control System | Drive Mode: | DC Electric Motor |
Power Comsumption: | Static Status: 20W; Dynamic Status: 60W | Humidity: | 5%~90% |
Lane Width: | 500-1000mm | Usage Life: | More Than 600 Million Times |
High Light: | tripod barrier gate,pedestrian turnstile gate,Stainless steel tripod security gates |
Stainless Steel Tripod Turnstile Gate For Rfid Door Access Control System
I. Tripod turnstile
Descriptions: the turnstile provides a basic tripod to control access smoothly and effectively by basic operation, and also prevent illegal in and out. The machine is well in design, rustproof, durable and can resist external destroy.
1. Standard Vertical tripod turnstile
1.1 Technology speciation:
Framework: 304 Grade Stainless Steel
Specification: 420*330*980mm
Weight: 45kg
Arms length: 510mm
Logic voltage: 24v
1.2. Function:
1.2.1.Single/double walkway---controlled in one direction or both
1.2.2.A valid lock action can allow one passage at one time
Normally open---the machine will unlock when a valid signal is received
1.2.3.It will lock automatically if passage through turnstile is not completed within pre-set time, the set time can be adjusted via parameter change.
1.2.4. Rotation indication: NO.
1.3. Emergency configuration:
The tripod will drop automatically by power off or by hand to provide a clear walkway for escape in the event of an emergency
1.4. Interface: one standard port-RS485 or Switch signal.
1.5. Can choose to add Control panel with count and LED digital function.
Stand tripod way: Use hand to press tripod, then return to origin place.
1.6. Traffic-light:
A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing
1.7. Transit speed: 20——30 persons per minute
1.8. Work environment:
Indoor/outdoor
Temperature: --40 below degree to 70 degree
1.9. Applications:
Station/exhibition/airport/subway/government/market and so on
2. Automatic Vertical tripod turnstile
2.1 Technology speciation:
Framework: 304 Grade Stainless Steel
Specification: 420*330*980mm
Weight: 45kg
Arms length: 510mm
Logic voltage: 24v
2.2. Function:
2.2.1.Single/double walkway---controlled in one direction or both
2.2.2.A valid lock action can allow one passage at one time
Normally open---the machine will unlock when a valid signal is received
2.2.3.It will lock automatically if passage through turnstile is not completed within pre-set time, the set time can be adjusted via parameter change.
2.2.4 Rotation indication: can rotate 15 degree angle to indicate pass.
2.3. Emergency configuration:
The tripod will drop automatically by power off or by hand to provide a clear walkway for escape in the event of an emergency
2.4. Interface: one standard port-RS485 or Switch signal.
2.5. Can choose to add Control panel with count and LED digital function.
Stand tripod way: Automatic
2.6. Traffic-light:
A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing
2.7. Transit speed: 20——30 persons per minute
2.8. Work environment:
Indoor/outdoor
Temperature: --40 below degree to 70 degree
2.9. Applications:
Station/exhibition/airport/subway/government/market and so on
II. iDS-610 – ESD Wrist Strap and Shoe Tester
III. ID or IC reader
1. Specification:
ID CARD
Frequency:13.56KHz
DIM:Length85.6mm × Width53.98mm × Thickness1.8mm
Material:Hard Shell = ABS;Cover Foil = PVC
Color:White , black, grey, blue, yellow
Power requirements: 5-16VDC at 100mA, A linear regulator is recommended
Interface: Weigand
Reader range: 5 - 10 cm
Operation temperature: -30 C to +60 C
operationg humidity: 5%-95% relative humidity non-condensing
Audio/Visual Indication: Green & Red and Buzzer signal output
Response Time: Less than 0.2 seconds
cable length: 250mm
Weight: 60g
2. Wiring :
Red: Power 5-16V
Black: Power ground
Green: Wiegand output D0
White: Wiegand output D1
Brown: Green LED control
Blue: Buzzer control
Yellow: Hold
LED/Buzzer function description
LED function: The LED color is normally in RED. It starts with 2 green flashes on power up the reader and remains RED. When a RFID proximity card is present to the reader, The LED will momentary flash green,this indicates that the card was read properly by the reader. When the LED control signal is active, the LED changes to green.
Beeper Function: Power up the reader, the beeper will active 2 times. When a RFID proximity card is present to the reader, a short beep will be emitter. This indicates that the card was read properly by the reader. When the Buzzer control signal is active, the buzzer will sound till buzzer control line is released
Hold function: when this line is asserted,(made low by HOST) the reader will buffer one card read (ignoring subsequent reads) until the line is released.(made high or open)
IV. Data Logging System D-Stat 700
D-Stat 700 Wrist Strap/Foot wear Datalogging System
Specification
Datalogger is connected to a PC via RS-232 or TCPIP
1>. Tester is able to test left and right footwear
simultaneously.
2>. Tester is ready to test for 5 seconds after swiping card
reader.
3>. Software to plot graph or report as specified.
4>. Software is customized according to users requirement.
5>. System to pull operators database from server.
6>. E-mail notification if operator fail test.
7>. Graph and report can be viewed by authorized workstation.
4. D-Stat 700 Wrist Strap/Footwear
Datalogging System
D-Stat 700 datalogging system is a self-contained and user
friendly system that provides the ultimate means to automate
the test data of the wrist strap and/or footwear.
The basic system consists of :
- Wrist strap and footwear tester
- D-Stat 700 Datalogging
- Ds-Reader
- Ds-Scheduler
- Ds-Reporting
- Ds-Fail Reporting
- Dual Conductor Footplate
- Barcode Reader/Smart Card Reader
- Computer
Advantages
Capture and record real time data-Name, ID No,
Pass or Fail, Time,date,ETC.
1>. Database is easy filtering of data-
Shift,Department,Date,Name,Station,ETC.
2>. Convincing data to show auditor.
3>. Database can be customize.
4>. Various form of reports – Graph and others.
5>. Automated e-mail feed for network system.
6>. Able to corporate with Gatebarrier tester.
5. DS-Reader
6. Ds_Scheduler
Contact Person: sales